1/24

SC Series Cuber

IM-SC220/B450

$13,297.90 AUD

Model SC130 SC220 SC270 SC500 SC1000C

Build Head Unit Only Head + Storage Unit

Australian Made

Made to Order

Built to Last

Heatlie has a 60-day return policy and all returns, cancellations and exchanges will incur a 20% restocking fee and a delivery fee from the place of pick up to the Heatlie factory. Alternatively, you may wish to organize your own transport at your own cost, to return the goods. Any refunds will only be given once the goods have been returned, inspected and are deemed to have...

1. Not been used

2. In new condition without any scratches, dents or marks that may occur through transport and use that will require that product to be refurbished in any way, for re-sale. This includes packaging.

Proof of purchase is always required and this includes a corresponding Serial Number.

Heatlie does not accept change of mind returns, nor will we refund if you have found the same product cheaper elsewhere.

Shipping Options

You will only be offered one shipping option for your order. We use two couriers, TNT/FedEx and Australia Post. Depending on the size, weight and volume of your order, you will be offered the corresponding service.

TNT/FedEx - Technology Sensitive express

Australia Post - Parcel Post & Express Post

Shipping Costs

After adding your product to the cart and proceeding to the checkout, you will be prompted to enter your delivery address. From here we use a service that delivers live rates from couriers to provide a price based on order size, weight, volume and your shipping location. Heatlie BBQs has no control over these prices.

Your order may be subject to further fees such as a redelivery fee of $25 if the initial delivery attempt by the courier is unsuccessful.

Order Lead Times

BBQ manufacturing can take several days or weeks to complete. We can not make any promises as to delivery times and lead times. You will receive tracking information once your order has left our premises.

Most orders containing only spare parts/accessories will usually leave us within 1-3 days. This still cannot be guaranteed.

Freight

Heatlie BBQs carries insurance for all goods freighted. Once goods are set down at designated drop off point, they are no longer insured by Heatlie BBQs. Therefore, the customer needs to give clear instructions on where goods are to be delivered. Heatlie BBQs is not responsible for any goods lost, stolen or damaged after they have been signed over to the customer, their designated person or dropped at a stop instructed by the customer, (except in the event of damage which has occurred whilst being freighted as outlined below).

If no person is available to sign or no instructions have been left for the drop off of goods, then the goods may be taken back to the nearest depot and cost to retrieve goods will be the responsibility of the customer. Heatlie BBQs packages all goods appropriately to avoid and or minimize any damage being sustained during freight. Unfortunately, damage can occur which is beyond our control. It is the customer's responsibility to look over the goods when signing for delivery and making a note on the delivery cart note of any damage they perceive.

In the event that no damage was perceived, and the customer has acknowledged that the goods have been delivered in good order and condition. It is the customer's responsibility to unwrap and inspect goods within the first 48 hours of taking delivery. If damage is evident, the customer must notify Heatlie BBQs within this set time, in writing, outlining all damage sustained, accompanied by photographic evidence to this effect.

Heatlie BBQs require the goods to be repacked by the customer to an adequate standard for freight. In most cases, Heatlie BBQS will have damaged goods refreighted back to our factory, where goods will be inspected. In cases where claim of damage is proven - replacement of same will be sent back to customer. All goods must be returned in same condition as sent, except for damage sustained in freight. Claims of damage are limited to damage to goods only.

Heatlie BBQs does not cover any consequential loss or damage suffered by the customer as a result of the damage of goods.

Ordered Goods

It is the customer's responsibility to check over their goods within 48 hours of receiving them to ensure that the item/items are exactly what was ordered. Faulty items need to be sent back to Heatlie BBQs.

Heatlie BBQs require the goods to be repacked by the customer to an adequate standard for freight. In most cases, Heatlie BBQs will have goods refreighted back to our factory, where goods will be inspected. All goods must be returned in same condition as sent. Heatlie BBQs will view and determine if item is faulty or not what was ordered. If the item is deemed to be in good working order, not damaged and represents what was ordered then the cost of freight will be at the customer's expense.

Change of mind and not liking what was ordered from the website is not deemed as sufficient for return or refund. If Heatlie BBQs is notified within 48 hours of customer receiving goods and an item is deemed to be either faulty or not what was ordered, then Heatlie BBQs will make all reasonable efforts to correct the situation.

INSPECT YOUR DELIVERY FOR DAMAGE

Your package should arrive securely wrapped. If this is not the case please take a photo and contact us immediately.

INSPECT YOUR ORDER

Verify: What you have received is what you have ordered.

MAKE SURE THIS IS NOT THROWN OUT IN THE PACKAGING.

Inspect: All items for defects or damage.

If defects or damage has occurred:

Notify info@heatlie.com.au within 48 hours of delivery being made to ensure we are able to act promptly. Include detailed photos, details of what has occurred and the sales invoice/order number.

WE WILL NOT ACCEPT any claims for damaged goods after 10 days from receipt of goods. Goods must be installed and used within 8 weeks of receipt.

Finally, enjoy using your new BBQ!

Heatlie BBQs warrants its products to be free of original manufacturing defects in material and workmanship, for a period of ten years from the date of purchase for domestic use and one year for commercial use. Any claim must be made within this time, dating from the date of purchase.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is subject to the following conditions:

The warranty applies to the original owner, so long as the original date of purchase can be verified or Warranty Card has been completed and returned to Heatlie Engineering.
The owner has the responsibility of adequately packaging the product and transporting it under insurance to place of purchase, Heatlie Authorised Service Centre, or to Heatlie Engineering, at the owner’scost.
Warranty service must be performed by a Heatlie Authorised Service Centre or by Heatlie Engineering.
Installation must conform to the applicable Gas and Building standards laid down by the country or state, and according to the Heatlie product instructions.
This warranty policy does not cover any problem associated with rust.
This warranty policy does not cover buckling or warping of the hotplate.
Lack of maintenance, abuse, misuse, neglect, accident or improper installation of the appliance will not be covered.
Corrosion or damage caused by exposure to the elements, insects, weather or hail will not be covered under this warranty.NOTE: All barbecues must be covered by a weatherproof cover when not in use.
Any evidence that the product has been modified or serviced by an unauthorised person will voidthe warranty.
Heatlie Authorised Service Centres or their representatives may provide on-site warranty service.

No other costs shall be covered by warranty other than the costs of parts and labour.

In the event that warranty service is required, contact a Heatlie Authorised Service Centre or the retailer from whom the product was purchased.
No other warranties, either expressed or implied, whether by distributor, retailer or employees of Heatlie, will be recognized or honoured by Heatlie. This limited warranty sets forth the sole remedy of the owner. The total liability of Heatlie Engineering is limited to the purchase of the product.

Heatlie are continually updating and improving their products. Therefore details and specifications are subject to change.

Fully microprocessor controlled
304 grade stainless steel cabinet
Nickel plated, double sided evaporator
Ice making capacity up to 1100kg per day for largest model
Ice storage capacity up to 400kg per day for largest model
Minimal water wastage
Available as self contained air cooled, remote air cooled or water cooled
Australian made
Food grade polyethylene bin liner with non CFC foamed-in-place insulation
Can be supplied with or without storage bin
Easy maintenance. Convenient access to all components

The SC series of ice cubers is capable of producing and storing large quantities of ice cubes for all applications.

Available as either a head unit on it's own, or a modular unit with a storage bin attached. Built with locally sourced parts makes acquiring replacement parts cheaper and faster.

Heatlie Ice Machines designs and manufactures every ice cuber machine with great attention to detail, to deliver high quality products that meet your ice making needs!

All SC ice machines are made to order in North Plympton, SA. Lead times vary, please contct us for more details.

Drainage

Floor waste must be within 2 metres of machine

Water Supply

3/4" BSP male stop cock within 1.5 metres of machine on left hand side

Specifications

SC	130	220	270	500	1000C
Production/ 24 hrs	152 kg	237 kg	296 kg	575 kg	1136 kg
Storage Capacity	100 kg	150 kg	220 kg	400 kg	320 kg
V/Hz	240/50				415/50
Amps	3.8	8.5	8.5	12.0	10 amps per phase
Weight	100 kg	130 kg	145 kg	218 kg	253 kg
Cube Size	25x20x20mm	25x20x20mm	25x20x20mm	25x20x20mm	25x20x20mm
Cube Weight	8-10 g	8-10 g	8-10 g	8-10 g	8-10 g

Dimensions

Modular (with Bin)

SC	130B	220B	270B	500B	1000CB
Width	730mm	730mm	770mm	1230mm	1050mm
Depth	600mm	930mm	810mm	915mm	930mm
Height	1425mm	1400mm	1720mm	2015mm	1990mm
Feet Height	100mm	100mm	150mm	150mm	150mm

Head Units

SC	130H	220H	270H	500H	1000HC*
Width	730mm	730mm	730mm	1050mm	1050mm
Depth	600mm	630mm	630mm	650mm	930mm
Height	450mm	590mm	590mm	775mm	800mm

Production Capacity		130	220	270	500	1000C
Ambient Temp	Water Temp	Kg/24 Hours
21°C	15°C	152kg	237kg	296kg	575kg	1136kg
21°C	21°C	138kg	220kg	284kg	525kg	992kg
32°C	21°C	106kg	190kg	255kg	475kg	948kg
38°C	21°C	96kg	172kg	231kg	408kg	864kg

*SC1000HRC Compact model head unit also includes a remote condenser.

Spare Parts

Gen. 3

Part	SC130	SC220	SC270	SC500
Compressor	IM-050654	IM-050766	IM-050766	IM-050841
Fan/Motor Assembly	IM-050348	IM-050348	IM-050348	IM-050620
Fan Control	IM-050622	IM-050622	IM-050622	IM-050622
Curtain Assembly - Front	IM-050774	IM-050757	IM-050776	IM-050778
Curtain Assembly - Rear	IM-050773	IM-050756	IM-050775	IM-050777
Evaporator Assembly	IM-050478SP	IM-050751	IM-050523SP	IM-050524SP
Solenoid Valve - Water	IM-050023	IM-050023	IM-050023	IM-050023
Solenoid Valve - Gas	IM-050704	IM-050704	IM-050704	IM-050705
Capillary Tube	1.62mm	1.78mm	1.78mm	-
	2500mm	2600mm	2250mm	-
Expansion Valve - Body	-	-	-	IM-050850
Expansion Valve - Office	-	-	-	IM-050851
Control Board	IM-050844F	IM-050844F	IM-050844F	IM-050844F
Display Board	IM-050877	IM-050877	IM-050877	IM-050877
Fuse - 3.15 amp	IM-0500011	IM-0500011	IM-0500011	IM-0500011

Pre-Gen. 3

Part	SC130	SC220	SC270	SC500	SC1000HC
Compressor	IM-050654	IM-050766	IM-050766	IM-050841	IM-050815
Fan/Motor Assembly	IM-050348	IM-050348	IM-050348	IM-050620	IM-050718
Fan Control	IM-050622	IM-050622	IM-050622	IM-050622	IM-050622
Curtain Assembly - Front	IM-050774	IM-050757	IM-050776	IM-050778	IM-050778 x2
Curtain Assembly - Rear	IM-050773	IM-050756	IM-050775	IM-050777	IM-050777 x 2
Evaporator Assembly	IM-050478SP	IM-050751	IM-050523SP	IM-050524SP	IM-05024SO x2
Solenoid Valve - Water	IM-050023	IM-050023	IM-050023	IM-050023	IM-050023
Solenoid Valve - Gas	IM-050704	IM-050704	IM-050704	IM-050705	IM-050706
Capillary Tube	1.62mm	1.78mm	1.78mm	-	-
	2500mm	2600mm	2250mm	-	-
Expansion Valve - Body	-	-	-	IM-050850	IM-050850
Expansion Valve - Office	-	-	-	IM-050851	IM-050851
Power Board	IM-050009	IM-050009	IM-050009	IM-050009	IM-050009
Logic Board	IM-050010	IM-050010	IM-050010	IM-050010	IM-050010
Interface Board	-	-	-	-	IM-050148
Fuse - 3.15 amp	IM-0500011	IM-0500011	IM-0500011	IM-0500011	-
Fuse - 5 amp	-	-	-	-	IM-050180
Switch - Water Curtain	IM-050043	IM-050043	IM-050043	IM-050043	IM-050043
Magnet - Water Curtain	IM-050794	IM-050794	IM-050794	IM-050794	IM-050794
Float - High Level	IM-050043	IM-050043	IM-050043	IM-050043	IM-050043
Float - Low Level	IM-050074	IM-050074	IM-050074	IM-050074	IM-050074
Pump - Water	IM-050570	IM-050570	IM-050570	IM-050570	IM-050570 x 2
Contactor	-	-	-	-	IM-050311

Generation 3 Information

Since 2021, Stuart Ice Machines has been supplying an upgraded version of the SC series, formally known as the Generation 3 range.

The upgraded ice machines include the following upgrades...

New control board
New display board
Half dice or full dice option of cube size
HP control to protect the compressor should the fan fail

These upgrades apply to the SC130, SC220, SC270 and SC500 model ice machines.

New Control & Display Board

The new control board continues to be made in Australia and has some significant enhancements.

All functions are now operated through the main control board and the machine will actually operate without the display board attached. This eliminates any confusion about which board is faulty when diagnosing problems.

Ice thickness is now adjusted via the + and – buttons on the display board at the front of the machine without the need to remove any panels or access the float switch at the side of the machine.

Additional Ice Cube sizes

In addition to our current standard cube size we can now also offer a half dice cube. This is better suited to those venues using blenders for drinks. Please contact us for a quote on this.

Modular

Head Units